DTC P0107: Notes

DTC P0107 [L3] CHART

DTC P0107	MAP sensor circuit low input
DETECTION CONDITION	The PCM monitors the input voltage from the MAP sensor when the intake air temperature is above -10 °C {14 °F} . If the input voltage at PCM terminal 2AL is below 0.1V , the PCM determines that the MAP sensor circuit has a malfunction. Monitoring Condition Calculated load: 13-32% Diagnostic support note This is a continuous monitor (CCM). MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA is available. The DTC is stored in the PCM memory.
POSSIBLE CAUSE	MAP sensor malfunction Connector or terminal malfunction Short to ground in wiring harness between MAP sensor terminal D and PCM terminal 2AL MAP sensor signal circuit and MAP sensor ground circuit are shorted each other PCM malfunction