DTC P0222: Notes

DTC P0222 [L3] CHART

DTC P0222	TP sensor No. 2 circuit low input
DETECTION CONDITION	The PCM monitors the input voltage from TP sensor No. 2 when the engine is running. If the input voltage is below 0.2 V , the PCM determines that the TP sensor No. 2 circuit input voltage is low. Diagnostic support note This is a continuous monitor (CCM). MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA is available. The DTC is stored in the PCM memory.
POSSIBLE CAUSE	TP sensor No. 2 malfunction Connector or terminal malfunction Open circuit in wiring harness between throttle body terminal B and PCM terminal 2K Short to body ground in wiring harness between throttle body terminal B and PCM terminal 2K Open circuit in wiring harness between throttle body terminal C and PCM terminal 21 Short to body ground in wiring harness between throttle body terminal C and PCM terminal 21 PCM malfunction