DTC P0327: Notes

DTC P0327 [L3] CHART

DTC P0327	KS circuit low input
DETECTION CONDITION	The PCM monitors input signal from the KS when the engine is running. If the input voltage at PCM terminals between 2Q and 2R is below 0.06 V the PCM determines that the KS circuit has malfunction. Diagnostic support note This is a continuous monitor (CCM). MIL illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA is available. DTC is stored in the PCM memory.
POSSIBLE CAUSE	KS malfunction Connector or terminal malfunction Open circuit or short to ground in wiring harness between KS connector terminal A and PCM terminal 2Q Open circuit or short to ground in wiring harness between KS connector terminal B and PCM terminal 2R Short KS two wires PCM malfunction