| DETECTION CONDITION |
- Actual idle speed is lower than expected by 100 RPM
for 14 s,
when brake pedal is depressed (brake switch is on).
NOTE:
- If atmospheric pressure is less than 72.3 kPa {542 mmHg, 21.3 inHg}
or intake air temperature is below -10 °C {14 °F},
the PCM cancels diagnosis of P0506.
Diagnostic support note
- This is a continuous monitor (CCM).
- MIL illuminates if the PCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the PCM.
- PENDING CODE is available if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA is available.
- DTC is stored in the PCM memory.
|