1st Gear, 1st Synchronizer Ring, 1st/2nd Clutch Hub Component Assembly Note

1. Place the 1st gear, 1st inner ring, 1st middle ring, 1st synchronizer ring, 1st/2nd clutch hub.
   CAUTION:

   • Align each clutch ring with the gear and clutch hub correctly.
   Fig 1: Installing 1St Gear, 1St Synchronizer Ring, 1St/2Nd Clutch Hub Components

   Courtesy of MAZDA MOTORS CORP.
2. Assemble the synchronizer key, spring, steel ball, and clutch hub sleeve as shown in the figure.
   Fig 2: Assembling Synchronizer Key, Spring, Steel Ball, And Clutch Hub Sleeve

   Courtesy of MAZDA MOTORS CORP.
3. Press fit the 1st/2nd clutch hub component using the SST  and a press.

Fig 3: Installing 1St/2Nd Clutch Hub Component Using SST And Press

Courtesy of MAZDA MOTORS CORP.