LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System AJ] >> On-Board Diagnostic Test >> On-Board System Readiness Tests Access Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Board System Readiness Tests Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console.
  3. Monitor the OBD-II systems operating status using the WDS or equivalent.
    Fig 1: Locating DLC-2 Connector
    G04324291Courtesy of MAZDA MOTORS CORP.