LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2006 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (AJ) >> Pcm Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Pcm Removal/Installation

NOTE:
  • To replace the PCM, connect the WDS and perform the PCM configuration. (See PCM REPLACEMENT ).
  1. Disconnect the negative battery cable.
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
    Fig 1: PCM Bracket & Torque Specification
    G04325285Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals