Steering Lock Unit Inspection [Advanced Keyless System]: Notes

Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
Measure the voltage at each terminal (other than terminals G and H).
- If the voltage is not as specified in the Terminal Voltage Table (Reference) , inspect the parts under "Inspection item(s)".
Disconnect the steering lock unit connector
Verify that continuity at terminals G and H is as indicated in the Terminal Voltage Table (Reference) .
- If there is any malfunction, inspect the parts under "Inspection item(s)".
  - If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the panel light control switch.