LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 3 s, 4D Hatchback, 2.3 3, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Keyless Control Module Removal/Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Keyless Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the map light. (See MAP LIGHT REMOVAL/INSTALLATION .)
  3. Disconnect the keyless control module connector.
  4. Remove the screw, then remove the keyless control module.
  5. Install in the reverse order of removal.
  6. When replacing the keyless control module, register the transmitter ID codes. (See TRANSMITTER ID CODE REGISTRATION ).
    Fig 1: Identifying Keyless Control Module Connector
    G04956867Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals