LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [Engine (L3)] >> Pcm Configuration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pcm Configuration

  1. Connect the M-MDS or equivalent to the DLC-2.
    Fig 1: Locating DLC-2 Connector
    G04325977Courtesy of MAZDA MOTORS CORP.
  2. After the vehicle is identified, from the initial screen select the following items:
    • When using the IDS (laptop PC) 
      1. Select "MODULE PROGRAMMING".
    • When using the PDS (Pocket PC) 
      1. Select "PROGRAMMING".
      2. Select "MODULE PROGRAMMING".
  3. Then select "Programmable Module Installation" and "PCM" from the screen menu.
  4. Select "Programmable Parameters". [With DSC HU/CM]
  5. Select "Tire Size / Axle Ratio". [With DSC HU/CM]
  6. Select "Body Type -(PCM)", then select the applicable body type on the screen. [With DSC HU/CM]
  7. Retrieve DTCs using the M-MDS or equivalent, then verify if DTCs are present.
    • If any DTC is present, perform applicable DTC inspection.
scientia non olet · About LEMON Manuals