LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 L4-2.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Body Control Module >> Service and Repair >> Procedures
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Procedures

BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the front side trim. (Left side)
3. Remove the fuse block.




4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals