LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Immobilizer System Component Replacement/Key Addition And Clearing [With Advanced Keyless System] >> M-MDS Connecting Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

M-MDS Connecting Procedure

CAUTION:
  • Do not place the M-MDS in the vehicle while programming, otherwise programming cannot be performed.
  1. Fully lower the door glass.
  2. Connect the M-MDS to the DLC-2.
  3. Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.
    CAUTION:
    • Protect the cable and body contact area with a clean rag, otherwise they could be damaged.
      Fig 1: Locating DLC-2 Connector
      G04327333Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals