LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Immobilizer System Reprogram Procedure [With Keyless Entry System] >> Security Access Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Security Access Procedure

NOTE:
  • When using the SST  (M-MDS) to perform "Ignition Key Code Erase" or "Customer Spare Key Programming Enable/Disable", it is necessary to obtain security access approval.
  1. Connect the SST  (M-MDS).
  2. Select "Tool box", "Body", "Security", and then "PATS Functions" (in this order).
  3. The SST  (M-MDS) will read out an outcode depending on the designated procedure.
    CAUTION:
    • After reading out the outcode, do not turn ignition switch from LOCK to ON position 5 times, otherwise the outcode value will be changed.
  4. Access the Mazda official website to obtain the incode that corresponds to the outcode.
  5. Input the incode to the SST  (M-MDS).
  6. Verify that the security access procedure finishes normally.
scientia non olet · About LEMON Manuals