LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System L3 With TC] >> On-Board Diagnostic Test >> Pending Trouble Code Access Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pending Trouble Code Access Procedure

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Toolbox" tab.
      2. Select "Self Test".
      3. Select "Modules".
      4. Select "PCM".
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "PCM".
      3. Select "Self Test".
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the M-MDS screen.
    Fig 1: Locating DLC-2 Connector
    G04324072Courtesy of MAZDA MOTORS CORP.
  4. Retrieve the pending trouble codes according to the directions on the M-MDS screen.
scientia non olet · About LEMON Manuals