October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Inspection

Disconnect the negative battery cable.
Disconnect the KS connector.
Measure the resistance between KS terminals A and B using an ohmmeter.
- If the KS is okay, but the PID value is out of specification, perform the "Circuit Open/Short Inspection".
- If not as specified, replace the KS. (See KNOCK SENSOR (KS) REMOVAL/INSTALLATION ).
  
  Fig 1: Identifying KS Connector Terminals
  Courtesy of MAZDA MOTORS CORP.
  
  Specification
  
  Approx. 4.87 megohms (20°C {68°F})