LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (AJ) >> Neutral Switch Inspection >> Continuity Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Continuity Inspection

  1. Disconnect the negative battery cable.
  2. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).
  3. Inspect for continuity between the neutral switch terminals A and B using an ohmmeter.
    • If the neutral switch is okay, but the PID value is out of specification, perform the "Circuit Open/Short Inspection".
    • If not as specified, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).

      Specification 

      Fig 1: Continuity Specification Chart
      G04325305Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Neutral Switch Connector Terminals
      G04325306Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals