Ignition Key Release Button Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda B4000, 2004 Mazda B3000, and 2004 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the ignition switch lock cylinder; see IGNITION LOCK CYLINDER REMOVAL/INSTALLATION .
If equipped, remove the tilt wheel handle.

Fig 1: Removing Tilt Wheel Handle
Courtesy of MAZDA MOTORS CORP.
Remove the upper and lower steering column shrouds.
1. Remove screws.
2. Remove shrouds.
Fig 2: Removing Upper & Lower Steering Column Shrouds
Courtesy of MAZDA MOTORS CORP.
Remove the key release lever bolt (1), lever (2) and spring (3).

Fig 3: Removing Key Release Lever Bolt , Lever & Spring
Courtesy of MAZDA MOTORS CORP.
Install in reverse order of removal.