LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B3000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Cruise Control System) >> Component Tests >> Clutch Switch >> Using NGS Tester
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using NGS Tester

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Connect NGS tester to Data Link Connector (DLC). Turn ignition switch on. Select PID/DATA MONITOR AND RECORD function, then press TRIGGER. Select CPP/PNP, then press start. Depress and release clutch pedal. Ensure operation is as specified by NGS tester, CLUTCH SWITCH SPECIFICATIONS  table. If operation is as specified, clutch position circuit is okay. If operation is not as specified, check clutch switch continuity. If switch is okay, repair clutch switch circuit. See WIRING DIAGRAMS  .

CLUTCH SWITCH SPECIFICATIONS

Clutch Pedal Position CPP/PNP Operation
Depressed ON
Released OFF
scientia non olet · About LEMON Manuals