Automatic Transmission External Controls Pinpoint Test 2: Shift Control Is Out Of Proper Gear Relationship

SHIFT CONTROL IS OUT OF PROPER GEAR RELATIONSHIP - PINPOINT TEST REFERENCE

PINPOINT TEST 2		SHIFT CONTROL IS OUT OF PROPER GEAR RELATIONSHIP
STEP	INSPECTION		ACTION
1	CHECK SHIFT CONTROL LINKAGE Key ON. Apply the brake pedal. Gain access to the shift control linkage. Actuate the transmission range selector lever in all ranges. Observe all linkages during operation. Is the linkage damaged?	Yes	Replace the shift control linkage. See SHIFT CABLE AND BRACKET REMOVAL / INSTALLATION . Test the system for normal operation.
1		No	Go to step 2.
2	CHECK TRANSMISSION SHIFT CABLE Check the transmission shift cable and the bracket installation and tightness. Is the transmission shift cable properly installed and adjusted?	Yes	Verify the transmission shift cable adjustment. See SHIFT CABLE AND BRACKET ADJUSTMENT . Adjust the transmission shift cable if necessary. Verify the digital transmission range (TR) sensor for proper adjustment. See DIGITAL TRANSMISSION RANGE SENSOR REMOVAL / INSTALLATION , . Adjust the digital TR sensor if necessary. Go to step 3.
2		No	Repair as necessary. Test the system for normal operation.
3	CHECK LINKAGE / CABLE FOR PROPER GEAR RELATIONSHIP Apply the brake pedal. Actuate the transmission range selector lever in all ranges. Does the indicator match the gear selection?	Yes	System OK. Test the system for normal operation.
3		No	See SHIFT CABLE AND BRACKET ADJUSTMENT . Test the system for normal operation.