LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 377 (Power Steering System) >> Steering Gear And Linkage Assembly >> Mounting Rubber Assembly Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Mounting Rubber Assembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply soapy water to the rubber part of the mounting rubber.
  2. Press the mounting rubber until the mounting rubber end comes out completely from the gear housing using the SSTs  and a press.
    Fig 1: Pressing Mounting Rubber
    G03644963Courtesy of MAZDA MOTORS CORP.
  3. Reverse the gear housing, then press the mounting rubber until the mounting rubber end comes out completely from the other side. At this time, the mounting rubber end and steel pipe are aligned.
    Fig 2: Aligning Mounting Rubber End And Steel Pipe
    G03644964Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals