LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 541 (Security System And Locks System) >> Trunk Lid Lock And Opener Removal/Installation >> Internal Trunk Lid Release Handle Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Internal Trunk Lid Release Handle Installation Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Always keep the handle firmly attached to the holder and in the recessed position. Not securing the handle this way could allow it to snag luggage in the compartment and open the trunk lid.
  1. After installation of the internal trunk lid release handle, pull the handle forward to verify the handle and rod are securely installed.
  2. Attach the handle to the holder on the cover and in the recessed position.
    Fig 1: Installing Internal Trunk Lid Release Handle
    G03638783Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals