Removal and Installation Note

Fig 1: Removing Audio Unit

Courtesy of MAZDA MOTORS CORP.

Remove the audio unit.
- Insert the removal tool.
- Remove and support the audio unit.
Fig 2: Disconnecting Audio Unit Electrical Connector And Antenna Cable
Courtesy of MAZDA MOTORS CORP.
Disconnect the audio unit electrical connector and antenna cable.

Fig 3: Removing Instrument Panel Finish Panel
Courtesy of MAZDA MOTORS CORP.
Remove the screws. Disengage the spring clips. Remove the instrument panel finish panel.

Fig 4: Removing 4WD Control Module
Courtesy of MAZDA MOTORS CORP.
Remove the 4WD control module.
1. Disengage the locking tangs and remove the harness connectors.
2. Remove the screws.
3. Remove the 4WD control module.
To install, reverse the removal procedure.