LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> CX-9 Sport, 3.5 C, FWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control System/Roll Stability Control System >> DSC/RSC HU/Cm Removal/Installation >> Brake Pipe Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Pipe Installation Note

  1. Align the marks made before removal and install the brake pipe to the DSC/RSC HU/CM and brake pipe joint referring to the figure.
  2. Tighten the brake pipe to the specified torque using the SST (49 0259 770B) and the commercially available flare nut wrench.
Fig 1: Identifying Master Cylinder (Primary Side) And Master Cylinder (Secondary Side)
G04970211Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals