LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2007 >> CX-9 Touring, 3.5 C, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (MZI-3.5) >> Camshaft Position (CMP) Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position (CMP) Sensor Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the battery.
  3. Remove the following part for easier access.
  4. Disconnect the CMP sensor connector
  5. Remove the CMP sensor.
    NOTE:
    • Lubricate the CMP O-ring seal with clean engine oil.
  6. Install in the reverse order of removal.
    Fig 1: View Of CMP Sensor With Torque Specifications
    G04969699Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals