DTC P2109: Notes
DTC P2109 DETECTION & CONDITION POSSIBLE CAUSES
| DTC P2109 |
TP sensor minimum stop range/performance problem |
| DETECTION CONDITION |
- The PCM monitors the minimum TP when the closed TP learning is completed. If the TP is less than 11.5%
or more than 24.3%
, the PCM determines that there is a TP sensor minimum stop range/performance problem.
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle.
- PENDING CODE is available if the PCM detects the above malfunction condition.
- FREEZE FRAME DATA is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Drive-by-wire control system malfunction
- Throttle actuator malfunction
- Throttle valve malfunction
- PCM malfunction
|