DTC P2119: Notes
DTC P2119 DETECTION & CONDITION POSSIBLE CAUSES
| DTC P2119 |
Throttle actuator control throttle body range/performance problem |
| DETECTION CONDITION |
- The PCM compares the TP with default TP when the ignition switch is turned off. If the TP is higher than the default TP, the PCM determines that there is a throttle valve return spring malfunction.
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if the PCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the PCM.
- PENDING CODE is available if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA is available.
- The DTC is stored in the PCM memory.
|
| POSSIBLE CAUSE |
- Drive-by-wire control system malfunction
- Throttle actuator malfunction
- Throttle valve malfunction
- PCM malfunction
|