Advanced Key ID Code Registration

ADVANCED KEY ID CODE REGISTRATION [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]

NOTE:
- For a key that can start the engine, or no advanced key, the M-MDS can be used to force the ignition to switch is IG ON. Forced Ignition On [With Advanced Keyless Entry And Push Button Start System]

1. Fully lower the driver-side door glass.

2. Connect the M-MDS to the DLC-2.






3. Set the M-MDS outside the vehicle with its cable passing through the door glass opening.

CAUTION:
- Cover the vehicle body with a clean rag so as not to damage the vehicle body with the cable.

4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- Using an IDS (laptop PC)

- Select the "Body"
- Select the "Security"
- Select the "PATS Functions"
- Using a PDS (Pocket PC):

- Select the "All Tests and Calibrations"
- Select the "PATS Functions"

5. Select the following from the screen menu.

- Select the "Program Additional Advanced Key"

6. Perform the security access according to the directions on the M-MDS screen.