LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 6 i SV, 2.5 A >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L5) >> Neutral Switch Inspection [L5] >> Continuity Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Continuity Inspection

  1. Disconnect the negative battery cable.
  2. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [G66M-R] .)
  3. Inspect for continuity between the neutral switch terminals using an ohmmeter.
    • If not as specified, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [G66M-R] .)
      Fig 1: Identifying Neutral Switch Components & Connector Terminals
      G06205234Courtesy of MAZDA MOTORS CORP.
      SPECIFICATION

      Measured condition Continuity
      Rod pushed Continuity detected
      Except above No continuity
scientia non olet · About LEMON Manuals