LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 6 s Touring >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Control System (Body Control Module) >> Body Control Module (BCM) Inspection >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Body Control Module (BCM) Inspection: Notes

  1. Remove the front scuff plate, (driver-side). See FRONT SCUFF PLATE REMOVAL/INSTALLATION .
  2. Remove the front side trim, (driver-side). See FRONT SIDE TRIM REMOVAL/INSTALLATION .
  3. Remove the BCM with the connector connected. See BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION .
  4. Measure the voltage at each terminal is as indicated in the Terminal Voltage Tables.
    • If the voltage is not as specified in the Terminal Voltage Table, inspect the parts under "Inspection item (s)".
    • If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the BCM.
scientia non olet · About LEMON Manuals