Advanced Keyless System

DTC CHART

x: Illuminated -: Not illuminated or not applicable
DTC					Detection condition	Reference
Security light flashing pattern	Keyless warning light	M-MDS display		-
Security light flashing pattern	Keyless warning light	Keyless control module	PCM	DTC
11	x	x	B10D9:87	P1260:00	No detected communication with coil antenna	See SECURITY LIGHT: 11, DTC: B10D9:87/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] .
12	x	x	B10D5:13	P1260:00	Coil antenna malfunction PCM or keyless control module determined a malfunction in coil antenna even though it is normal	See SECURITY LIGHT: 12, DTC: B10D5:13/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] .
13	-	-	B10D7:05	P1260:00	Key ID number program error	See SECURITY LIGHT: 13, DTC: B10D7:05/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] .
13	-	-	B10D7:94	P1260:00	Key ID number data cannot be read	See SECURITY LIGHT: 13, DTC: B10D7:94/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] )
14	-	-	B10D7:81	P1260:00	Keyless control module cannot read key ID number data normally	See SECURITY LIGHT: 14, DTC: B10D7:81/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] .
15	-	-	B10D7:51	P1260:00	Keyless control module has detected unprogrammed key ID number	See SECURITY LIGHT: 15, DTC: B10D7:51/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] .
16	-	-	U0100:87	P1260:00	Communication error between keyless control module and PCM (no response/condition mismatch)	See SECURITY LIGHT: 16, DTC: U0100:87/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] .
21	x	-	B10D8:00	P1260:00	Only one key or no key has been programmed	See SECURITY LIGHT: 21, DTC: B10D8:00/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] \)
22	-	-	B10DA:51	P1260:00	Communication error between keyless control module and PCM (data transfer failure)	See SECURITY LIGHT: 22, DTC: B10DA:51/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] )
23	-	-	B10DA:62	P1260:00	ID number data in keyless control module and PCM do not match	See SECURITY LIGHT: 23, DTC: B10DA.62/P1260:00 [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] .
Not illuminated	x	x	B10E6:11	-	Voltage less than the specification (2.2-6.5 V) is detected for 0.5 s while the coil antenna power supply circuit is active	See SECURITY LIGHT: NOT ILLUMINATED, DTC B10E6:11/- [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] )
			B10E6:12	-	Voltage higher than the specification (2.2-6.5 V) is detected for 0.05 s while the coil antenna power supply circuit is not active	See SECURITY LIGHT: NOT ILLUMINATED, DTC B10E6:12/- [IMMOBILIZER SYSTEM (ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM)] .
			U0001:88	U0073:00	Module communication error (HS-CAN)
		-	U0100:00	-	Communication error with PCM
		x	U3000:41	-	Keyless control module internal malfunction	See DTC U3000:41 [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .