LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 6 s Touring >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Wheel And Column Removal/Installation [With Advanced Keyless Entry And Push Button Start System] >> Joint Bolt (Intermediate Shaft) Removal Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Joint Bolt (Intermediate Shaft) Removal Note

  1. Place alignment marks on the intermediate shaft joint as shown in the figure.
    NOTE:
    • Do not detach the intermediate shaft joint while servicing. If the intermediate shaft joint is mistakenly detached while servicing, align the alignment marks placed during the joint bolt removal and connect the intermediate shaft.
      Fig 1: Identifying Alignment Marks On Intermediate Shaft Joint
      G06200204Courtesy of MAZDA MOTORS CORP.
  2. Place alignment marks on the intermediate shaft joint, and the steering gear for proper installation.
  3. Remove the joint bolt and detach the intermediate shaft from the steering gear.
    Fig 2: Identifying Alignment Marks On Intermediate Shaft Joint
    G06200213Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals