LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> 6 s Touring >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Wheel And Column Removal/Installation [Without Advanced Keyless Entry And Push Button Start System] >> Joint Bolt (Intermediate Shaft) Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Joint Bolt (Intermediate Shaft) Installation Note

  1. If the intermediate shaft joint is mistakenly detached while servicing, align the alignment marks placed during the joint bolt removal and connect the intermediate shaft.
    Fig 1: Identifying Alignment Marks On Intermediate Shaft Joint
    G06200204Courtesy of MAZDA MOTORS CORP.
  2. Align the marks made during removal and install the intermediate shaft joint to the steering gear.
    Fig 2: Identifying Alignment Marks On Intermediate Shaft Joint
    G06200213Courtesy of MAZDA MOTORS CORP.
  3. After temporarily installing the joint bolt to the intermediate shaft joint, shake the intermediate shaft up and down to verify that the joint bolt is installed to the groove of the steering gear.
  4. Tighten the joint bolt to the specified torque.
    Fig 3: Intermediate Shaft Joint Bolt With Torque Specifications
    G06200214Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals