LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> B2300 Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Powertrain Control Module (Pcm) Removal / Installation >> Removal Note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Note

  1. Retrieve the module configuration. Perform the module configuration retrieval steps of the Programmable module installation procedure. See Programmable Module Installation ,
  2. Remove the PCM wiring harness retainer nut.
  3. Remove the ground wire stud bolt.
  4. Disconnect the 3 PCM electrical connectors.
  5. Remove the 2 nuts and the PCM.
scientia non olet · About LEMON Manuals