LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> B4000 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 420 (Air Bag System) >> Passenger-Side Air Bag Module Removal/Installation (Two-Step Deployment Control System) >> Connector (2) Removal Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Connector (2) Removal Note

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a flathead screwdriver, pry out the connector stopper plate.
    Fig 1: Removing Connector Stopper Plate
    G03700845Courtesy of MAZDA MOTORS CORP.
  2. Disconnect the connector.