LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> B4000 V6-4.0L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Alignment
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Alignment




Alignment





Vehicle Ride Height





SUSPENSION DESIGN HEIGHT SETTING

NOTE:Make sure the vehicle is on a flat, level surface, such as a drive-on hoist.
1. Jounce the vehicle's front and rear suspension to normalize the vehicle static ride height.

2. Measure the ride height.






1.
NOTE:The torsion bar adjusting bolt is coated with a thread locking compound that wears off after disassembly. If the torsion bar system is ever disassembled or if the torsion bar adjusting bolt is ever removed, use a new torsion bar adjusting bolt when assembling.Adjust the ride height as follows:

- To increase the ride height, tighten the torsion bar adjusting bolt.
- To decrease the ride height, loosen the torsion bar adjusting bolt.



scientia non olet · About LEMON Manuals