Rear Wheel Alignment: Notes

REAR WHEEL ALIGNMENT (UNLOADED)⁽¹⁾

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full

Total toe-in

[Tolerance ±4 {±0.16}]

(mm {in})

2 {0.08}

(degree)

0°10'±20'

Camber angle⁽²⁾ (Reference value)
[Tolerance ±1°]

-0°51'

-0°54'

-0°57'

-1°00'

-1°03'

Thrust angle (Reference value) [Tolerance ±0°48']

0°

⁽¹⁾	Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.

⁽²⁾	Difference between left and right must not exceed 1°30'.

NOTE: Total toe-in measuring position

Tire: A indicated in the figure (between the center of the tires)
Rim inner: B indicated in the figure (between the inner side of the rims)

Fig 1: Identifying A & B Measurement Points
Courtesy of MAZDA MOTORS CORP.