Accelerator Pedal Position (App) Sensor Inspection [LF]: Notes

NOTE:

• Before performing the following inspection, make sure to follow the procedure as indicated in the troubleshooting flowchart. (See HOW TO USE THIS SERVICE INFORMATION )

1. Connect the M-MDS to the DLC-2.
2. Turn the ignition switch to the ON position.
3. Select APP1 and APP2 PID on the M-MDS.
4. Verify that the APP1 and APP2 PID is within the specification when the accelerator pedal not depressed. (See PCM INSPECTION [LF] )

Fig 1: Identifying DLC-2

Courtesy of MAZDA MOTORS CORP.