Power Window Main Switch Removal/Installation

Disconnect the negative battery cable.
Using a flathead screwdriver wrapped with protective tape, pry up the rear of the switch panel and detach the clip.
Remove the switch panel from the front door trim keeping the tab from catching.
Disconnect the power window main switch connector and the power mirror switch connector.

Fig 1: Detaching Rear Of Switch Panel Clip Using Flathead Screwdriver
Courtesy of MAZDA MOTORS CORP.
Remove the screws, then remove the power window main switch.
Install in the reverse order of removal.

Fig 2: Identifying Power Window Main Switch And Switch Panel

Courtesy of MAZDA MOTORS CORP.