Oil Pressure Sensor Removal/Installation [13B-MSP]

1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [13B-MSP] .)
2. Disconnect the negative battery cable.
3. Remove the extension manifold (upper.) (See INTAKE MANIFOLD REMOVAL/INSTALLATION [13B-MSP] )
4. Remove the extension manifold (lower.) (See INTAKE MANIFOLD REMOVAL/INSTALLATION [13B-MSP] )
5. Disconnect the oil pressure sensor connector.
6. Remove the oil pressure sensor.
7. Install in the reverse order of removal.

Fig 1: Oil Pressure Sensor With Screws Torque Specification

Courtesy of MAZDA MOTORS CORP.