LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2009 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Pressure Sensor >> Testing and Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oil Pressure Sensor: Testing and Inspection




OIL PRESSURE SENSOR INSPECTION [13B-MSP]

NOTE:
- Before performing the following inspection, make sure to follow the troubleshooting flowchart. Foreword

1. Turn the ignition switch to ON position.

2. Verify that the voltage at PCM terminals 2R is within the specification.

- If not as verified, replace the oil pressure sensor. Service and Repair

Oil Pressure Sensor Output Voltage
- 0.55-1.03 V [Oil Pressure: 50-150 kPa {0.51-1.52 kgf/cm2, 7.3-21.7 psi}]

scientia non olet · About LEMON Manuals