Spark Plug: Service and Repair

-
SPARK PLUGS REMOVAL/INSTALLATION - 2.5L

1. Remove the ignition coils. See - Service and Repair.

2. Remove the spark plugs.

- Tighten to 12 Nm {1.2 kgf-m, 106 in-lbf}.

CAUTION:Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
NOTE:Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
3. Inspect spark plugs. See Testing and Inspection.






4. To install, reverse the removal procedure.

- Adjust the spark plug gap as necessary.