October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ball Joint

Rotate the ball joint stud 5 times. Install the SST to the ball joint stud, measure the rotational torque using a pull scale.

If not within the specification, replace the lower arm.

Front lower arm ball joint rotational
Torque 1.0-4.9 Nm {11-49 kgf-cm, 9-43 in-lbf}
Pull scale reading [10-49 N {1.1-4.9 kgf, 3-10 lbf}]