LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 3 i SV, 2.0 F >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Main Switch Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window Main Switch Inspection: Notes

  1. Switch the ignition to ON.
  2. Verify that the door glass (driver's side) can be operated for approx. 43 s  after the ignition is switched off.
    • If the door glass (driver's side) cannot be operated for approx. 43 s  after the ignition is switched off, or if door glass (driver's side) can still be operated after approx. 43 s  , replace the power window main switch.
  3. Disconnect the negative battery cable.
  4. Remove the inner garnish, (driver's side) (See INNER GARNISH REMOVAL/INSTALLATION .)
  5. Remove the front door trim, (driver's side) (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  6. Remove the main switch panel, (driver's side) (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY .)
  7. Connect the power window main switch connector.
  8. Connect the negative battery cable.
  9. Measure the voltage at each terminal.
    • If the voltage is not as specified in the terminal voltage table, inspect the parts under Inspection item (s) and related wiring harnesses.
      • If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the power window main switch.
scientia non olet · About LEMON Manuals