LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 3 i SV, 2.0 F >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [LF, L5] >> Engine Coolant Temperature (ECT) Sensor Removal/Installation >> ECT Sensor No. 1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECT Sensor No. 1

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5] .)
  2. Disconnect the negative battery cable.
  3. Drain the engine coolant. (See COOLING SYSTEM SERVICE WARNINGS .)
  4. Remove the battery and battery tray. (See BATTERY REMOVAL/INSTALLATION [LF, L5] .)
  5. Disconnect the ECT sensor No. 1 connector.
  6. Remove the ECT sensor No. 1 using the SST.
  7. Install in the reverse order of removal.
  8. Refill the engine coolant. (See COOLING SYSTEM SERVICE WARNINGS .)
Fig 1: Engine Coolant Temperature (ECT) Sensor Replacement Components With Torque Specifications
G06730867Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals