September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC B10C1:11 [Advanced Keyless Entry And Push Button Start System]: Notes
DETECTION CONDITION AND POSSIBLE CAUSE
| DETECTION CONDITION |
Touch sensor (LF) circuit voltage less than threshold (2.2-6.5 V
) is detected for 1 s
while the circuit is active |
| POSSIBLE CAUSE |
- Connector or terminal malfunction
- Short to ground in wiring harness between front outer handle (LH) terminal C and keyless control module terminal 3Q
- Touch sensor (LF) malfunction
- Keyless control module malfunction
|
 Courtesy of MAZDA MOTORS CORP.
|