September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC B112A:11 [Advanced Keyless Entry And Push Button Start System]: Notes
DETECTION CONDITION POSSIBLE CAUSE
| DETECTION CONDITION |
IG2 relay output circuit voltage less than threshold (2.2-6.5 V
) is detected for 0.1 s
, while the circuit is active |
| POSSIBLE CAUSE |
- Connector or terminal malfunction
- Short to ground in wiring harness between relay block terminal 2A and keyless control module terminal 4H
- Relay block malfunction
- Keyless control module malfunction
|
 Courtesy of MAZDA MOTORS CORP.
|