September 30: LEMON manuals is back up on a temporary server! Slowness is possible
DTC B112A:17 [Advanced Keyless Entry And Push Button Start System]: Notes
DETECTION CONDITION AND POSSIBLE CAUSE
| DETECTION CONDITION |
IG2 monitor input circuit voltage higher than threshold (2.2-6.5 V
) is detected for 1 s
, while IG2 relay output circuit is not active |
| POSSIBLE CAUSE |
- Connector or terminal malfunction
- Short to power supply in wiring harness between relay block terminal 1F and keyless control module terminal 4X
- Relay block malfunction
- Keyless control module malfunction
|
 Courtesy of MAZDA MOTORS CORP.
|