Keyless Beeper Removal/Installation [Advanced Keyless Entry And Push Button Start System]

1. Disconnect the negative battery cable.
2. Slightly bend back the front mudguard. (See FRONT MUDGUARD REMOVAL/INSTALLATION .)
3. Disconnect the connector.
4. Remove the blot.
   Fig 1: Connector, Keyless Beeper & Bolts With Torque Specifications

   Courtesy of MAZDA MOTORS CORP.
5. Press the keyless beeper tab aside using a tape-wrapped flathead screwdriver
6. Remove the keyless beeper from the bracket
7. Install in the reverse order of removal.

Fig 2: Removing Keyless Beeper From Bracket

Courtesy of MAZDA MOTORS CORP.