LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> 6 s Touring Plus >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment System >> Front Wheel Alignment >> Maximum Steering Angle Adjustment
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Maximum Steering Angle Adjustment

  1. Loosen the tie-rod end locknuts.
  2. Remove the steering gear boot clamp.
  3. Turn the tie rods.

    Standard length L 

    15.7-22.7 mm {0.619-0.893 in} 

  4. Turn the tie rods equally to provide the correct maximum steering angle.
  5. Tighten the tie-rod end locknuts.

    Tightening torque 

    69-98 N.m {7.1-9.9 kgf.m, 51-72 ft.lbf} 

    Fig 1: Tightening Tie-Rod End Locknuts
    G06205374Courtesy of MAZDA MOTORS CORP.
  6. Verify that the boot is not twisted, and install the boot clamp.
  7. Adjust the toe-in after adjusting the steering angle.
scientia non olet · About LEMON Manuals