LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2010 >> CX-9 Sport, 3.7 A, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Customized Function Setting Procedure [Advanced Keyless Entry And Start System]
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Customized Function Setting Procedure [Advanced Keyless Entry And Start System]

NOTE:
  • Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the CUSTOMIZED FUNCTION SETTING PROCEDURE.
  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS. When using the IDS (laptop PC)
    1. Select the "Module Programming".
  3. Then, select items from the screen menu in the following order.
    1. Select "Programmable Parameters".
    2. Select "RKE".
  4. Select an item name, and then select option.
    Fig 1: Identifying DLC-2
    G04970771Courtesy of MAZDA MOTORS CORP.
MAZDA MODULAR DIAGNOSTIC SYSTEM (M-MDS) DISPLAY REFERENCE CHART

Mazda Modular Diagnostic System (M-MDS) display Function Initial setting Setting content Control unit
Answer Back Buzzer Answer back buzzer function can be set. Enabled Disabled/Enabled Keyless control module
Card key battery low warning Advanced key remaining battery level/battery dead warning can be set. Enabled Disabled/Enabled Keyless control module
Automatic Locks Automatic locks function can be set. Disabled Disabled/Enabled Keyless control module
scientia non olet · About LEMON Manuals